Tag Archives: guardians of the galaxy

Chris Pratt: Using Star Lord to Make a Difference

Chris Pratt is offering the chance to hang with him on set. Check out his fundraising campaign for details. Seriously. I bet he’s awesome to hang with.

Thanks to my Star-Lord project, I’ve developed quite an affinity for all things Star-Lord. I’ve grown to appreciate the complexity of his character, what he stands for, and Chris Pratt’s depiction of him in the movies and public appearances. I get particularly excited when someone, particularly the actor himself, uses the character for charitable purposes. Chris, more than many other actors, recognizes the power of his character to advance charitable causes, raise money, and lift the spirits of those around him.

Yesterday, I was excited to see that he’s at it again. In an effort to raise money for his hometown Boys and Girls club, Chris is offering some awesome goodies and a chance to visit him on the set of Guardians 2. How cool.

From Chris’ site, here’s a picture of kids from his hometown who utilize the club. In his words: “who you’ll help.”

For me, the value of this campaign isn’t the in the rewards. It’s seeing Chris Pratt trying to make a difference by utilizing a character that people love. It’s in him using his fame to improve the world in a small way.

I’m going to support that. Speaking as someone who ran a fundraising campaign for charity, the number of donations matters as much as the total money raised. I don’t have much money to spare, but I’m going to scrape together to do what little I can.

Let’s spread the word and help Chris out. If you appreciate Chris and managed to scrape something together for a donation, leave a comment!

The “Run”

Leave a reply

After months of preparation, costume design, and annoying my friends on Facebook, the run is complete. Here’s how it went down.

My morning began at 3am. Because my wife was helping to run the event, we had to get there early. Super early. At 4am the park was dark and cool. We couldn’t have asked for better weather. After arriving, I helped place signs, set up tables, and move boxes of t-shirts.

It is amazing how much goes on behind the scenes to make these events happen. There were hundreds of volunteers to direct, water stations to set up, and tents to arrange. Despite everything we had to do, it went smoothly and everything was ready by the time the first runners rolled in.

And roll in they did – over 2500 runners in all. Supermen, Batmen, Ninja Turtles, Marvel, DC, Nintendo and Nickelodeon. Simple costumes and elaborate costumes. I saw it all. Although I spotted several Groots, there were no other Star Lords in attendance. So, luckily, I had a unique costume. Unfortunately, Star Lord doesn’t really stand out. Very few people realized who I was. I think most people assumed I was some random futuristic biker. But all of the Groots knew who I was…so there’s that.

He is Groot.

Before the run, I spent most of my time watching the costume contest. It was great seeing people show off costumes they put so much time into. I have to say, my favorite was the “Mario Kart” family. Hilarious, and ingenious. Eventually, it was time to head to the starting line. I made my way there and ended up near the end of the pack. That was fine with me. I wasn’t looking to win any speed medals. In fact, I was so paranoid of dropping the Walkman that I ended up walking the majority of the route. My brother, dressed as Duffman, walked with me.

I’m not going to lie, it was warm. Hot even. The jacket and the pants are not ideal for running/walking. However, I’m proud to say that I survived.

Guardians of the Galaxy…and Robin with ice cream.

Found some other Guardians at the run.

Here is the full getup!

Unexpected Problems…and Solutions. Mostly.

4 Replies

Last week, I wore the partially completed costume to a roller derby match in order to promote the CASA Superhero run. It was a great test run for the outfit. Putting the whole thing together brought to my attention some details I hadn’t considered.

Problem: Belt loops. Turns out, the motorcycle pants I ordered didn’t have them. This was an issue for me since Star Lord wears a belt.

My wife is awesome.

Solution: Luckily, my wife is amazing with her sewing machine and helped me out.

Problem: Wearing the Walkman. The Walkman comes with a pouch and a strap to attach to my belt. However, the pouch covers the front of the Walkman so that you can’t tell what it is. This wouldn’t work for me.

Solution: I purchased an OtterBox belt clip from a thrift store and modified it for the Walkman. Using some ribbon and snaps, we created some straps that held the Walkman in the clip. It worked for the entire evening. I may need to add some additional straps for the run, however.

I removed a section of the top. We then used superglue to attach snaps to the back of the clip and to the ribbon.

Problem: Attaching the blasters to my belt.

Solution: I utilized elastic ribbon and velcro patches to create a loop which I used to attach the blaster to my belt. Halfway through the evening, the “fabric glue” on the back of one of the patches slid off and the blaster crashed to the floor. So, I placed the blaster on the display table. Of course, some kids ran over, picked it up, and began shooting the darts all over the place. My meticulously painted blaster. Sigh.

I ordered custom holsters.

Star Lord Boot Covers

Leave a reply

I’m not going to lie, the boot covers were intimidating. I found some tutorials online, but didn’t think I had the leather-working skills to pull them off effectively. So, I outsourced the labor.

I found a gentleman named James Neathery who is pretty good with leather. Having already made numerous copies of these boot covers, I sent him a message asking him to make a pair for me. If anyone is interested in custom projects, I’ll post his business card in the bottom of this blog post.

So, here is what they look like (with rocket booster mounted) side by side with the screen used boot covers:

While not exact, these things are pretty darn good. Of course, Chris Pratt’s are more weathered…

You can see the quality of the leatherwork, here. They are well made. Each cover comes in two parts, the front and back. The straps stretch around the leg and fasten to rivets on the back of the boot covers. There is an elastic strap on the bottom that loop over the shoe, holding the cover in place. Having seen a picture of the clip on the back of my rocket boosters, James placed a strap on the side that allows me to attach them snugly.

Here’s a picture of the back:

Here is the back. The straps actually attach to a second leather piece.

I must say, they fit really well. James asked for some measurements so they fit me perfectly and over the pants I purchased for this outfit.

Overall, I’m really pleased. For an added bonus, I have a video showing the boot covers and what they look like when worn.

Finally, here is James’ business card.

The Iconic Jacket

1 Reply

This was a big one.

The Jacket.

The Iconic Jacket.

This is a picture of a display of the screen used jacket.

I’m not going to lie, I was putting this off for two reasons. First, there are so many options out there for the jacket that it was incredibly difficult to pick the right one. I couldn’t find any that matched exactly and so this became an exercise in comparing numerous jackets to find one with the details I liked and without ones I could sacrifice. Second, the jackets are expensive. Red leather jackets – even if I wasn’t going for an exact match – are not cheap.

And then, after weeks of agonizing over this decision, my wife made the jacket my anniversary present. Rather than surprise me the morning of (which she felt bad about), she decided to discuss it with me in advance and together we settled on a good one. We spent just a little bit extra to get one made of real leather rather than imitation, for realism and durability.

Here it is (pictures from the website):

Here it is! There are some details that don’t match exactly, but it’s not a bad substitute.

While looking at this jacket on the website, we noticed multiple reviews where buyers stated that they were able to wear the jacket day to day. To us, that was an added bonus. If you’re going to spend a ton of money on a jacket for a costume, may as well make it one you can wear when you’re not at a Superhero 5k or Comic-Con, right?

The Boots…er Shoes…?

Leave a reply

Let’s start by taking a look at these things. Here are a few pictures of the screen used costume pieces:

This shot is from the RPF at http://www.therpf.com/showthread.php?t=219777

Another angle from the RPF.

View from the back.

Like pretty much everything else Star-Lord wears, I’m pretty sure that these are custom made. They are definitely boots. The bottoms look like sketchers with a sneaker like sole. At first, I thought he was simply wearing sketchers with boot covers. However, when you examine the back of his legs, you can definitely tell that he is wearing boots. They are weird boots, but boots nonetheless.

As I saw it, I had two ways of tackling these.

Buy Sketchers. Proper boot covers would conceal the fact that I’m not wearing shoes.
Find boots – hope they look somewhat like the screen used versions.

I chose to go with option 1. Because the majority of whatever boots I bought would be covered by the boot covers, it made sense to me to focus on making the exposed part of the footwear – the part on my feet – match as best as possible. It also occurred to me that running in boots sucks. A lot. Wearing shoes would make things a lot easier.

For matching shoes, I went with these:

Available on Amazon!

These sketchers seem to match the base of the boots fairly well. In particular, I noticed that the soles as viewed from the sides appears to be dead on. So, these are what I went with. Let’s hope that it’s not too noticeable that I’m not wearing boots!

The 5k is getting closer and closer…

Chris Pratt Asks Facebook to Create His Cover Photo

Leave a reply

I’m going to take a quick break from the costume and CASA to share something awesome.

Yesterday, Chris Pratt, the actor behind Star-Lord, asked his Facebook fans to create a new cover photo for his page. I’m not sure he knew exactly what he was getting himself into, but his wall quickly exploded with Photoshop awesomeness. Here’s his guidance:

Hello friends and fans. I am in the market for a new header for my FB page. I want to do a contest. Whoever replies with the best header (make sure your signature is big enough to be seen) will have the honor of it being my official header.

I don’t know photo shop. But you do and this could be a great way for me to notice you and give you accolades plus maybe a free dinner at applebees or something like that who knows sky’s the limit.

so. i need a header. which looks like it would be 1 tall x 3.5 wide.
I’m looking to have Peter Quill, Owen, Andy and Emmet in the mix. possibly some other fun stuff including but not limited to previous roles, my family, eagles, american flags, guns, cool ford raptors, cigars, explosions, anything sly stallone, bloodsport, early steven segal, anything that looks bad ass and will say, “Hey this facebookprofile is chris’s and this is what he’s all about.” maybe some raptors, or even some largemouth bass or deer or trophy elk, maybe some cool guns or rollerblades or possibly even a nascar or a steak maybe even some corndogs. don’t ask me! you decide!

so yeah. who’s gonna get me the best one and have their name displayed for millions of people to see?

Here are some of my favorites:

Created by Aisling O’Hagan-Gamble. I love how it all blends together. Kind of reminds me of Firefly.

Created by Ramel Ureña. Love the raptors. I’m not sure how he did a Lego raptor…but it’s seriously awesome.

Kode Abdo created an awesome original background. Love that he’s riding a raptor holding a beer. Only Chris Pratt could do that without spilling the whole thing.

If you can’t Photoshop, Lego. Motto to live by. Here’s one by Cody Ogrentz.

Ginger Clark went in a completely different direction because…why not? I admire the originality.

This one submitted by Mitchell Cotton. ‘Merica.

I love this one created by Brandi Kenney. She writes “Dear Mr. Pratt, I’m sure you’ve probably wondered: “What would happen if Peter Quill and Owen Grady’s raptors formed a band?” Well, I’m here to tell you that you don’t have to wonder anymore. Here is the cover album artwork for a record I like to think would have been heavily influenced by the Jackson 5″ Check out her Facebook page: Brandi Kenney – Design.

I call this one the Chris Pratt “James Bond” Header. Created by Monica Price.

Ryan Adams submitted this gem. I have no words. Chris Pratt did. He said, “this might be the one!!!”

If there’s one thing Chris Pratt gets besides acting and raptor taming, it’s social media.

Which one is your favorite? Is there another one you would like to see added to the list? Let me know!

As always, if you enjoy the blog, feel free to subscribe and support me by donating to CASA. Link on the right! –>

Rocket Booster Controls: Part 2!

Leave a reply

These were a fun little art project. Let me remind you what they looked like when I received them:

As you can see, it needs some finishing work.

Using an X-ACTO knife, I cleaned out the grooves and tried to smooth out any rough parts on these props. Once I was satisfied with the grooves, I spray painted them flat black.

Spray painting the booster controls. I made sure not to fill the grooves with paint by overdoing it with the paint.

Using a brush this time, I slowly applied a layer of silver Rub-N-Buff to give it a dirty, metallic look. I left the center button black to match the film used prop. When I liked the look, I sprayed it with a coat of glossy Deft to protect the paint.

One thing I noticed with the Rub-N-Buff is that it NEEDS the clear coat. With paint, you can get away without the protective coat. You would be taking a chance that the paint chips, but you could handle the prop carefully and get away with it. Not so with Rub-N-Buff. Because it is wax based, a thin coat never really seems to dry completely. It will rub off and blemish if touched with enough force. Just a word of caution there.

Anyway, here is a step by step look:

Finished product on the right. Thoughts?

Thoughts?

Midway Point…

Leave a reply

So, we’re at about the midpoint of this project. I fully realize that it’s been a while since I’ve updated you all on my progress. It has been an incredibly busy week!

I’ve been working on a number of projects over the past few days and so the costume building was somewhat sidelined. I’m not going to lie, after a long day of work and with multiple demands on my time, it is sometimes hard to motivate myself to work on costume pieces. I’ve managed to put in a few minutes here and there, but not as much as I would like. With the clock ticking down, I’m starting to get anxious!

That being said, I wanted to take a second to thank you all for the encouragement I’ve received over the past few weeks. What has inspired me more than anything, besides the knowledge that I’m supporting CASA’s mission, is the support I continue to receive from readers, social media connections, and friends. I can’t thank everyone enough! With that being said, I’m ready to get back into costume building, and look forward to continued feedback and support from you all!

I have a few updates to post over the next few days. For today, I wanted to share a picture of my desk. It pretty much captures where various “crafting” projects are at:

My Desk. Rocket boosters, blasters, headphones…

You can see that I have a ways to go with some of these!

As always, I’m grateful for all the encouragement and I know CASA is grateful for all the donations they’ve received thus far. Thanks again!

Rocket Booster Controls: Details, Details, Details…

Leave a reply

These controls are another small detail which I probably could have skipped.

But I didn’t.

As a reminder of what these are and where they fit in the overall outfit, here’s a (somewhat blurry) screenshot of Star Lord’s leg:

See the booster control on the leg?

At first, I thought about making them. They don’t seem terribly detailed. In preparation, I began looking around for close ups and other fan made mock ups to base my model off of.

While searching, I ended up on Etsy and found some cool models for sale. One, in particular, caught my eye. A shop called Nova Props cold casts rocket booster controls from hard plastic. What sets them apart from other fan made props is the strong magnets inserted in them. Nova props sells the controls with iron on patches containing magnets of their own.

Buying these meant that I didn’t have to spend time figuring out how to attach the controls to the pants. Definitely a time saver. Here’s some shots of the controls taken after I received them:

As you can see, it needs some finishing work.

This shows the front and back. You can see the magnets.

These are the rocket control patches.

As you can see, the controls need some finishing work. Shouldn’t be hard to finish them in the same way I did the rocket boosters.

One step closer. It’s amazing how many steps there are to getting this done.

Becoming Star-Lord.

Documenting my transformation into a Superhero…for charity, of course.

Tag Archives: guardians of the galaxy

Chris Pratt: Using Star Lord to Make a Difference

The “Run”

Unexpected Problems…and Solutions. Mostly.

Star Lord Boot Covers

The Iconic Jacket

The Boots…er Shoes…?

Rocket Booster Controls: Part 2!

Midway Point…

Rocket Booster Controls: Details, Details, Details…